Zebra Technologies 1050020011570, 105SLTM, ZM40021014100T YES, Parameter, RESET NETWORK, Reset Network2,3, Action/Explanation, The LCD prompts ARE YOU SURE, 1. Press PLUS (+) to select YES

			Configuration	101
			Control Panel Parameters
		Table 10 • Print Server Parameters (Page 4 of 4)
Parameter			Action/Explanation
			Reset Network2,3
	RESET NETWORK
			This option resets the wireless card and the print server when the wireless
	YES		option is running. Selecting this option has no effect when the wireless
			option is not running, when there is no card inserted, or when the wireless
			password is anything other than the default (zero).
			1. Press PLUS (+) to select YES.
			The LCD prompts ARE YOU SURE?.
			2. Do you wish to reset the network parameters?
			• If no, press MINUS (–)to select NO and cancel the request.
			• If yes, press PLUS (+) to select YES and reset the network.

1Appears only when the ZebraNet Wireless Print Server is installed.

2These parameters appear after the system recognizes the existence of a ZebraNet print server (wired or wireless). After the print server is recognized, all zeroes (000.000.000.000) will display until the printer obtains an IP address or defaults to address 192.168.254.254.

3If a wireless password is set, you must enter the wireless password (not the printer password) to access this parameter.

6/30/06 105SL User Guide 11342L-001 Rev. A