Zebra Technologies 1050020011570, 105SLTM, ZM40021014100T Remove Labels from the Rewind Spindle, To remove media liner from the rewind spindle, complete these steps:

Operations 55

Load Media in Rewind Mode

15.Push the printhead assembly down (1), and then rotate the printhead-open lever clockwise until it locks into place (2).

21

Remove Labels from the Rewind Spindle

Rewind mode uses a core to wind printed labels. Remove the core with the printed labels every time you change labels for the Rewind option to work correctly.

Important • It is not necessary to turn off the power to remove printed labels. If power is turned off, all label formats and images, as well as any temporarily saved parameter settings stored in the printer’s internal memory, are lost. When power is turned back on, these items must be reloaded.

To remove media liner from the rewind spindle, complete these steps:

1.Have the labels run out?

If... Then...

Yes Slide the core from the rewind spindle.

6/30/06 105SL User Guide 11342L-001 Rev. A