Zebra Technologies 1050020011570, 105SLTM, ZM40021014100T Printing Specifications, Ribbon Specifications

Specifications 145

Printing Specifications

Printing Specifications

Printing Specifications

Resolution			203 dots/inch (8 dots/mm) or
			300 dots/inch (12 dots/mm)
Dot size (width × length)		203 dpi	0.0049 in. × 0.0049 in. (0.125 mm × 0.125 mm)
		300 dpi	0.0033 in. × 0.0039 in. (0.084 mm × 0.10 mm)
First dot location measured from inside media edge			0.10 in. ± 0.035 in. (2.5 mm ± 0.89 mm)
Maximum print width for roll media			4.49 in. (114 mm)
Maximum print width for fanfold media			4.1 in. (104 mm)
Print Length	Continuous printing	203 dpi	90 in. (2286 mm)
(maximum)
		300 dpi	41 in. (1041 mm)
Media registration toleration*		Vertical	±0.050 in. (1.3 mm)
(non-continuous media)
		Horizontal	±0.050 in. (1.3 mm)
Programmable print speeds		203 dpi	2.4 in. (61 mm) through 8.0 in. (203 mm)
			per second in 1 in. (25.4 mm) increments
		300 dpi	2.4 in. (61 mm) through 8.0 in. (203 mm)
			per second in 1 in. (25.4 mm) increments
Bar code	Ladder (rotated)	203 dpi	4.9 mil to 49 mil
modulus (“X”)	orientation
		300 dpi	3.9 mil to 39 mil
dimension
	Picket fence	203 dpi	4.9 mil to 49 mil
	(nonrotated)
		300 dpi	3.3 mil to 33 mil
	orientation
Thin film printhead	with Element Energy	Equalizer (E3)®	Yes

*Media registration and minimum label length are affected by media type and width, ribbon type, and print speed. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing.

Ribbon Specifications

Ribbon Specifications

Ribbon must be wound with the coated side out.

Ribbon width		Minimum	0.79 in. (20 mm)
		Maximum	4.49 in. (114 mm)
Standard lengths	2:1 media to ribbon roll ratio		984 ft. (300 m)
	3:1 media to ribbon roll ratio		1476 ft. (450 m)
Ribbon core inside diameter			1.0 in. (25.4 mm)
Maximum ribbon roll outside diameter			3.2 in. (81.3 mm)

6/30/06 105SL User Guide 11342L-001 Rev. A