Zebra Technologies 1050020011570, 105SLTM, ZM40021014100T Clean the Media Compartment and Sensors, Figure 30 • Upper Media Sensor Assembly, Figure 31 • Lower Media Sensor Assembly

112Routine Maintenance

Clean the Media Compartment and Sensors

Clean the Media Compartment and Sensors

After every four rolls of media, inspect the media compartment. Use a soft bristle brush or a vacuum cleaner to remove any dirt and lint from the interior of the printer.

The sensors should be cleaned on a regular basis to ensure proper operation of the printer. Brush or vacuum any accumulated paper lint and dust off of these sensors.

To clean the media compartment and sensors, complete these steps:

1.Brush or vacuum any accumulated paper lint and dust away from the media and ribbon paths.

2.Brush or vacuum any paper lint and dust away from the sensors.

Figure 30 • Upper Media Sensor AssemblyFigure 31 • Lower Media Sensor Assembly

11342L-001 Rev. A 105SL User Guide 6/30/06