Zebra Technologies 1050020011570, 105SLTM, ZM40021014100T Media Specifications

146 Specifications

Media Specifications

Media Specifications

Media Specifications

Minimum label length*		Tear-Off	0.7 in. (18 mm)
		Peel-Off	0.5 in. (13 mm)
		Cutter	1.5 in. (38 mm)
		Rewind	0.25 in. (6 mm)
Total media width (label + liner, if any)		Minimum	0.79 in. (20 mm)
		Maximum	4.52 in. (115 mm)
Total thickness (includes liner, if any)		Minimum	0.003 in. (0.076 mm)
		Maximum	0.012 in. (0.305 mm)
Cutter maximum full-width media thickness			0.009 in. (0.229 mm)
Roll media core inside diameter			3 in. (76 mm)
Maximum roll diameter			8.0 in. (203 mm)
Inter-label gap		Minimum	0.079 in. (2 mm)
		Preferred	0.118 in. (3 mm)
		Maximum	Maximum inter-label gap =
			2 × (label length for which you have calibrated
			the printer) + 1 in. (25.4 mm)
Maximum internal fanfold media pack size (label + liner)			8.0 in. × 4.5 in. × 4.5 in.
L × W × H			(203 mm × 114 mm × 114 mm)
Ticket/tag sensing notch L × W			0.12 in. × 0.25 in. (3 mm × 6 mm)
Ticket/tag sensing hole diameter			0.125 in. (3 mm)
Additional	Mark length	Minimum	0.12 in. (3 mm)
specifications for	(measuring parallel to
		Maximum	0.43 in. (11 mm)
black mark sensing	label/tag edge)
	Mark width	Minimum	≥ 0.43 in. (≥ 11 mm)
	(measuring to
		Maximum	Full media width
	perpendicular label/tag
	edge)
	Mark location		Marks must be located within 0.040 in. (1 mm)
			of the inside media edge.
	Mark density		>1.0 Optical Density Unit (ODU)
	Maximum density of back of media		0.5 ODU
	on which black mark is printed

*Media registration and minimum label length are affected by media type and width, ribbon type, print speed, and printer mode of operation. Performance improves as these factors are optimized. Zebra recommends always qualifying any application with thorough testing.

11342L-001 Rev. A 105SL User Guide 6/30/06