Configuration

 

85

 

 

 

 

 

 

 

 

Control Panel Parameters

 

 

 

 

 

Table 9 • Printer Parameters (Page 7 of 19)

 

 

 

 

 

 

 

Parameter

 

 

Action/Explanation

 

 

 

 

 

 

 

 

 

List All

 

 

LIST ALL

 

 

 

 

 

 

 

 

This option prints labels that list the available fonts, bar codes, images,

 

PRINT

 

 

 

formats, and the current printer and network configurations.

 

 

 

 

 

 

 

 

To print labels for all settings:

 

 

 

 

1. Press PLUS (+) to select PRINT.

 

 

 

 

 

 

 

 

 

Format Memory Card

 

 

FORMAT CARD:

 

 

 

 

 

 

 

 

This option erases all previously stored information from the optional

 

A:

B:

 

PCMCIA card or Compact Flash card.

 

 

 

 

Caution • This option completely erases the selected card.

To format a memory card:1.Press MINUS (-)to select A: or PLUS (+) to select B:.

If your printer is set to require a password, you are prompted to enter the password.

2.Enter the password. For instructions, see Change Password-Protected Parameters on page 76.

3.Press the appropriate button again to select the desired card. The display shows ARE YOU SURE?.

4.Do you wish to continue?•Press MINUS (-)to select NO to cancel the request and return toFORMAT CARD prompt.•Press PLUS (+) to select YES and begin initialization.

When initialization is complete, the printer automatically exits Setup mode, and the control panel displays PRINTER READY. If you exit Setup mode while initialization is still in process, the control panel display flashes between the phrases CHECKING B: MEMORY and

PRINTER IDLE.

Note • Depending on the amount of memory in the memory card, initialization may take up to 5 minutes to complete.

6/30/06

105SL User Guide

11342L-001 Rev. A