Zebra Technologies 1050020011570, 105SLTM, ZM40021014100T - MM, PRINT WIDTH, Set Print Width, Table 9 • Printer Parameters (Page 4 of 19)

82Configuration

Control Panel Parameters

		Table 9 • Printer Parameters (Page 4 of 19)
	Parameter		Action/Explanation
			Set Print Width
PRINT WIDTH
			Determines the printable area across the width of the label given the
- MM	+
			resolution of the printer.
			Note • Setting the width too narrow can result in portions of the
			label not being printed on the media. Setting the width too wide
			wastes formatting memory and can cause printing off the label and
			on the platen roller. This setting can affect the horizontal position of
			the label format if the image was inverted using the ^POI ZPL II
			command.

To change the value shown:

1.Press MINUS (-)to move the cursor.

2.Press PLUS (+) to increase the value of the digit.

To change the unit of measurement:

1.Press MINUS (-)until the unit of measurement is active.

2.Press PLUS (+) to toggle to a different unit of measure (mm, inches, or dots).

11342L-001 Rev. A 105SL User Guide 6/30/06