Zebra Technologies 1050020011570, 105SLTM, ZM40021014100T Control Panel Lights, Table 2 • Control Panel Lights, Table 1 • Control Panel Buttons (Continued)

		Introduction	11
		Control Panel
	Table 1 • Control Panel Buttons (Continued)
Button	Appearance	Function
MINUS		Changes the parameter values. Common uses are to decrease a value, to
		answer “no,” to scroll through choices, or to change the cursor position
		while entering the password.
PLUS		Changes the parameter values. Common uses are to increase a value, to
		answer “yes,” to scroll through choices, or to change values while entering
		the password.

Control Panel Lights

Table 2 describes lights on the control panel that indicate different printer conditions.

Note • If two operating conditions occur simultaneously (for example, one that causes a light to be on constantly and one that causes the same light to flash), the light flashes.

Table 2 • Control Panel Lights

Light	Appearance	Status	Indication
POWER		Off	The printer is off or power is not applied.
		On	The printer is on.
TAKE		Off	Normal operation.
LABEL
		Flashing	(Peel mode only.) The label is available. Printing pauses
			until the label is removed.
ERROR		Off	Normal operation—no printer errors.
		Flashing	A printer error exists. Check the LCD for more information.
CHECK		Off	Normal operation—ribbon (if used) is properly loaded.
RIBBON
		On	Printing pauses, the LCD displays a warning message, and
			the PAUSE light is on.
			• If the printer is in Direct Thermal Mode: ribbon is loaded.
			• If the printer is in Thermal Transfer Mode: no ribbon is
			loaded, or ribbon is loaded incorrectly.
PAPER OUT		Off	Normal operation—media is properly loaded.
		On	No media is under the media sensor. Printing pauses, the
			LCD shows an error message, and the PAUSE light is on.
PAUSE		Off	Normal operation.
(located above
		On	The printer stopped all printing operations. Causes include:
the PAUSE
			• PAUSE was pressed
button)
			• A label format included a pause command
			• A printer error was detected.
			The LCD gives additional information.

6/30/06 105SL User Guide 11342L-001 Rev. A