Zoom Zoom V3 manual Voice Over IP Settings, Changing Your VoIP Settings

2

Voice Over IP Settings

If you purchased a V3 Model 5567, you do not need this chapter. If you have another V3 model, please continue below.

2.1 Changing Your VoIP Settings

The V3 needs to be configured with specific information for the VoIP service that you plan to use.

If you received the V3 from your service provider, it is likely that it is preset for their VoIP service. In most cases the service provider will tell you that the unit has been preset. If you’re not sure you can check by going to the Advanced VoIP Setup page (Double-click the Zoom V3 icon on your desktop, then the Voice over IP button on the opening page, then the Advanced VoIP Setup button.) If the User ID box is filled in, your V3 is preset; you can now refer to Section 1.3 Tips for Making VoIP Calls on page 18 or Section 2.2 Call Forwarding and Call Waiting on page 28. If your V3 is not preset, continue below.

If Your Unit Is Not Preset for VoIP

There are two ways to configure the V3 for VoIP. Both require that you enter specific information provided to you by your service provider.

Some service providers use Auto Account Configuration. If your service provider gave you a Server Address, they are using Auto Account Configuration. Go to Auto Account Configuration on page 24.

Chapter 2: Voice Over IP Settings 23