If you have changed the system settings on your V3 unit and for some reason want to restore them to the factory default settings, you can do so in one of two ways: You can perform a software reset or a hard reset.

If you can open your Web browser and access your V3’s user interface, here’s how to perform a software reset:

From the Advanced Setup page, under Administration, click Reset to Default. You will be prompted to click the Write Settings to Flash and Reboot button. Once this process is complete, your unit is reset to its factory settings. Click on any of the icons at the top of the page to continue.

If you lose your link to the unit and cannot communicate with it via the Web browser, here’s how to perform a hard reset.

Using a paper clip, press the RESET button on the unit’s back panel. While holding in this button, count to five, and then release the button. You are now guaranteed that all system settings are restored to the unit’s factory defaults.

1.8Windows Users: Removing the V3

If you have Windows and want to remove your V3—for instance, if you move your computer to a location without broadband service—you should remove the software before disconnecting the hardware.

1 From the desktop, select Start Programs Zoom VoIP Gateway Uninstall.

2 When prompted to confirm your choice, click Yes.

3 When the process is complete, you will be prompted to click Finish.

4 Unplug your V3 hardware.

22

Zoom V3 User’s Guide

Page 22
Image 22
Zoom Zoom V3 manual Windows Users Removing