Zoom Zoom V3 manual Linux TCP/IP Settings, For Mac OS 7.6.1

For Mac OS 7.6.1 - 9.2.2

1From the Apple menu, choose Control Panels and then TCP/IP to display the TCP/IP Window.

2Under Connect via:, select Ethernet built-in.

Under Configure:, select Using DHCP Server.

Do not enter anything in the DHCP Client ID field.

3Close the TCP/IP Window. You will be asked if you want to save the changes. Click Save.

4Now return to Configuring Your V3 on page 14.

Linux TCP/IP Settings

The instructions for setting up boot-time DHCP vary dramatically by distribution, so you may want to refer to your particular version’s documentation.

Note: If you have more than one network card installed, you will need to pick distinct Ethernet identifiers for each (eth0, eth1, eth2, etc.). If you select an identifier other than eth0 for your ADSL modem, use that identifier throughout.

Appendix C: Macintosh and Linux Users: Setting TCP/IP Network Settings 69