From the Apple menu, choose Control Panels and then TCP/IP to display the TCP/IP Window. Under the TCP/IP tab, highlight Manually in the Configure: list box and enter the settings for IP Address, Subnet mask, Router address, and Name server addr. shown below, unless you chose an IP address in Step 1 other than 10.2.2.16, in which case you should enter the number that you chose instead of 10.2.2.16. When done, close the Window and you will be prompted to click Save. Then continue with
Step 6.
IP address | 10.2.2.16 |
|
|
Subnet mask | 255.255.255.0 |
|
|
Router address | 10.2.2.2 |
(V3’s LAN IP address) |
|
|
|
Name server addr. | 10.2.2.2 |
|
|
5 Red Hat Linux Users Only:
a
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
BROADCAST=10.2.2.255
NETMASK=255.255.255.0
IPADDR=10.2.2.16
GATEWAY=10.2.2.2
NETWORK=10.2.2.0
bThen edit or create /etc/resolv.conf so that it contains the following line:
NAMESERVER=10.2.2.2
Note:
If you are using another version of Linux and you are unsure how to enter this information, consult the help file or documentation that came with your operating system.
48 | Zoom V3 User’s Guide |
