Prestige 650R-31/33 ADSL Router

For incoming packets, your Prestige applies data filters only. Packets are processed depending on whether a match is found. The following sections describe how to configure filter sets.

The Filter Structure of the Prestige

A filter set consists of one or more filter rules. Usually, you would group related rules, for example, all the rules for NetBIOS, into a single set and give it a descriptive name. You can configure up to twelve filter sets with six rules in each set, for a total of 72 filter rules in the system.

8.2Configuring a Filter Set

To configure a filter set, follow the steps shown next.

Step 1. Enter 21 in the main menu to display Menu 21 – Filter Set Configuration.

 

Menu 21 - Filter Set Configuration

Filter

Comments

Filter

Comments

Set #

Set #

------

-----------------

------

-----------------

1

NetBIOS_WAN

7

_______________

2

NetBIOS_LAN

8

_______________

3

TELNET_WAN

9

_______________

4

PPPoE

10

_______________

5

FTP_WAN

11

_______________

6

_______________

12

WebSet

Enter Filter Set Number to Configure= 0

Edit Comments= N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 8-3 Menu 21 – Filter Set Configuration

Step 2. Type the filter set to configure (no. 1 to 12) and press [ENTER].

The web configurator uses filter rule set 11 and 12. Your custom configuration will

be replaced if you use rule 11 or 12.

Step 3. Type a descriptive name or comment in the Edit Comments field and press [ENTER].

8-4

Filter Configuration