Prestige 650R-31/33 ADSL Router

b.Select Client and then click Add.

c.Select Microsoft from the list of manufacturers.

d.Select Client for Microsoft Networks from the list of network clients and then click OK.

e.Restart your computer so the changes you made take effect.

Configuring TCP/IP

1.In the Network window Configuration tab, select your network adapter's TCP/IP entry and click Properties.

2.Click the IP Address tab.

-If your IP address is dynamic, select Obtain an IP address automatically.

-If you have a static IP address, select Specify an IP address and type your information into the IP Address and Subnet Mask fields.

3.Click the DNS Configuration tab.

-If you do not know your DNS information, select Disable DNS.

-If you know your DNS information, select Enable DNS and type the information in the fields below (you may not need to fill them all in).

4.Click the Gateway tab.

-If you were not given a gateway IP address, remove previously installed gateways. -If you have a gateway IP address, type it in the New gateway field and click Add.

5.Click OK to save and close the TCP/IP Properties window.

6.Click OK to close the Network window. Insert the Windows CD if prompted.

7.Turn on your Prestige and restart your computer when prompted.

Verifying TCP/IP Properties

1.Click Start and then Run.

2.In the Run window, type "winipcfg" and then click OK to open the IP Configuration window.

3.Select your network adapter. You should see your computer's IP address, subnet mask and default gateway.

J

TCP/IP