Prestige 650R-31/33 ADSL Router

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One

Local IP:

Start=

End = N/A

Global IP:

Start=

End = N/A

Server Mapping Set= N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 7-9 Menu 15.1.1.1 – Editing/Configuring an Individual Rule in a Set Table 7-6 Menu 15.1.1.1 – Editing/Configuring an Individual Rule in a Set

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Type

Press [SPACE BAR] and then [ENTER] to select from a total of five types.

One-to-

 

These are the mapping types discussed in Table 7-2.Server allows you to

One

 

specify multiple servers of different types behind NAT to this computer. See

 

 

section 7.5.3 for an example.

 

Local IP

Only local IP fields are N/A for server; Global IP fields MUST be set for

 

 

Server.

 

Start

This is the starting local IP address (ILA).

0.0.0.0

End

This is the ending local IP address (ILA). If the rule is for all local IPs, then

N/A

 

put the Start IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is

 

 

N/A for One-to-One and Server types.

 

Global IP

 

 

Start

This is the starting global IP address (IGA). If you have a dynamic IP, enter

0.0.0.0

 

0.0.0.0 as the Global IP Start. Note that Global IP Start can be set to

 

 

0.0.0.0 only if the types are Many-to-Oneor Server.

 

End

This is the ending global IP address (IGA). This field is N/A for One-to-One,

N/A

 

Many-to-One and Server types.

 

Server

Only available when Type is set to Server. Type a number from 1 to 10 to

 

Mapping

choose a server set from menu 15.2.

 

Set

 

 

Once you have finished configuring a rule in this menu, press [ENTER] at the message “Press ENTER to Confirm…” to save your configuration, or press [ESC] to cancel.

7-12

NAT