Prestige
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
DHCP= None
Client IP Pool Starting Address= N/A
Size of Client IP Pool= N/A
Primary DNS Server= N/A
Secondary DNS Server= N/A
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version=
Multicast=
IP Policies= 2,4,7,9
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Type IP Policy sets here.
Go to menu 11.3 (shown next) and type the number(s) of the IP Routing Policy set(s) as appropriate. You can cascade up to four policy sets by typing their numbers separated by commas.
Menu 11.3 - Remote Node Network Layer Options
IP Options: | Bridge Options: |
IP Address Assignment= Static | Ethernet Addr Timeout (min)= 0 |
Rem IP Addr: 0.0.0.0 |
|
Rem Subnet Mask= 0.0.0.0 |
|
My WAN Addr= 0.0.0.0 |
|
NAT= Full Feature |
|
Address Mapping Set= 2 |
|
Metric= 2 |
|
Private= No |
|
RIP Direction= Both |
|
Version= |
|
Multicast= |
|
IP Policies= 2,4,7,9 |
|
Press ENTER to Confirm or ESC to Cancel:
Type IP Policy sets here.
13.6 IP Policy Routing Example
If a network has both Internet and remote node connections, you can route Web packets to the Internet using one policy and route FTP packets to a remote network using another policy. See the next figure.
IP Policy Routing |