Prestige 650R-31/33 ADSL Router

 

 

Table 5-2 TCP/IP Remote Node Configuration

 

 

 

 

 

 

 

 

FIELD

DESCRIPTION

EXAMPLE

 

 

 

 

 

 

 

 

Select SUA Only if you have just one public WAN IP address for your

 

 

 

 

Prestige. The SMT uses Address Mapping Set 255 (menu 15.1 - see

 

 

 

 

section 7.3.1).

 

 

 

 

Select None to disable NAT.

 

 

 

 

 

 

 

 

Address

When Full Feature is selected in the NAT field, configure address

2

 

 

Mapping Set

mapping sets in menu 15.1. Select one of the NAT server sets (2-10) in

 

 

 

 

menu 15.2 (see the NAT chapter for details) and type that number here.

 

 

 

 

When SUA Only is selected in the NAT field, the SMT uses NAT server

 

 

 

 

set 1 in menu 15.2 (see the NAT chapter for details).

 

 

 

 

 

 

 

 

Metric

The metric represents the “cost” of transmission for routing purposes.

2

 

 

 

IP routing uses hop count as the cost measurement, with a minimum of

 

 

 

 

1 for directly connected networks. Type a number that approximates the

 

 

 

 

cost for this link. The number need not be precise, but it must be

 

 

 

 

between 1 and 15. In practice, 2 or 3 is usually a good number.

 

 

 

Private

This determines if the Prestige will include the route to this remote node

Yes

 

 

 

in its RIP broadcasts. If set to Yes, this route is kept private and not

 

 

 

 

included in RIP broadcast. If No, the route to this remote node will be

 

 

 

 

propagated to other hosts through RIP broadcasts.

 

 

 

RIP Direction

Press [SPACE BAR] and then [ENTER] to select the RIP Direction.

Both

 

 

 

Options are Both, In Only, Out Only or None.

 

 

 

Version

Press [SPACE BAR] and then [ENTER] to select the RIP version.

RIP-2B

 

 

 

Options are RIP-1, RIP-2Bor RIP-2M.

 

 

 

Multicast

IGMP-v1sets IGMP to version 1, IGMP-v2sets IGMP to version 2 and

IGMP-v2

 

 

 

None disables IGMP.

 

 

 

IP Policies

You can apply up to four IP Policy sets (from 12) by typing in their

3, 4, 5, 6

 

 

 

numbers separated by commas.

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to

 

 

cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

 

 

 

 

 

 

5.1.2 IP Static Route Setup

Static routes tell the Prestige routing information that it cannot learn automatically through other means. This can arise in cases where RIP is disabled on the LAN or a remote network is beyond the one that is directly connected to a remote node.

Remote Node TCP/IP Configuration

5-5