Prestige
| Menu 25.1.1 - IP Routing Policy | ||
Policy Set Name= set1 |
| ||
Active= Yes |
|
|
|
Criteria: | = | 6 |
|
IP Protocol | Packet length= 10 | ||
Type of Service= | Don't Care | ||
Precedence | = Don't Care | Len Comp= N/A | |
Source: |
|
| end= 192.168.1.64 |
addr start= 192.168.1.2 | |||
port start= 0 |
| end= N/A | |
Destination: |
|
| end= N/A |
addr start= 0.0.0.0 | |||
port start= 80 |
| end= 80 | |
Action= Matched | = 192.168.1.1 | Log= No | |
Gateway addr | |||
Type of Service= No Change |
| ||
Precedence | = No Change |
|
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
FigureStep 3. Check Menu 25.1 – IP Routing Policy Setup to see if the rule is added correctly. Step 4. Create another policy set in menu 25.
Step 5. Create a rule in menu 25.1 for this set to route packets from any host (IP=0.0.0.0 means any host) with protocol TCP and port FTP access through another gateway (192.168.1.100).
IP Policy Routing |