Prestige 650R-31/33 ADSL Router

Menu 3 - LAN Setup

1.LAN Port Filter Setup

2.TCP/IP and DHCP Setup

Enter Menu Selection Number:

Figure 2-12 Menu 3 – LAN Setup

2.12.1 LAN Port Filter Setup

This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reduce traffic and prevent security breaches.

Menu 3.1 - LAN Port Filter Setup

Input Filter Sets: protocol filters= device filters=

Output Filter Sets: protocol filters= device filters=

Press ENTER to Confirm or ESC to Cancel:

Figure 2-13 Menu 3.1 – General Ethernet Setup

If you need to define filters, please read the Filter Set Configuration chapter first, then return to this menu to define the filter sets.

2.13 Protocol Dependent Ethernet Setup

Depending on the protocols for your applications, you need to configure the respective Ethernet Setup, as outlined next.

For TCP/IP Ethernet setup refer to Internet Access Application. For bridging Ethernet setup refer to Bridging Setup.

Hardware Installation and Initial Setup

2-15