Prestige 650R-31/33 ADSL Router

 

 

Table 4-2 Remote Node Network Layer Options

 

 

 

 

 

 

 

 

FIELD

DESCRIPTION

EXAMPLE

 

 

 

 

 

 

 

My WAN Addr

Some implementations, especially UNIX derivatives, require

 

 

 

 

separate IP network numbers for the WAN and LAN links and each

 

 

 

 

end to have a unique address within the WAN network number. In

 

 

 

 

that case, type the IP address assigned to the WAN port of your

 

 

 

 

Prestige.

 

 

 

 

NOTE: Refers to local Prestige address, not the remote router

 

 

 

 

address.

 

 

 

 

 

 

 

 

NAT

Press [SPACE BAR] and then [ENTER] to select Full Feature if you

None

 

 

 

have multiple public WAN IP addresses for your Prestige.

 

 

 

 

Select SUA Only if you have just one public WAN IP address for

 

 

 

 

your Prestige. The SMT uses Address Mapping Set 255 (menu 15.1

 

 

 

 

- see section 7.3.1).

 

 

 

 

Select None to disable NAT.

 

 

 

 

 

 

 

 

Address Mapping

When Full Feature is selected in the NAT field, configure address

2

 

 

Set

mapping sets in menu 15.1. Select one of the NAT server sets (2-

 

 

 

 

10) in menu 15.2 (see the NAT chapter for details) and type that

 

 

 

 

number here.

 

 

 

 

When SUA Only is selected in the NAT field, the SMT uses NAT

 

 

 

 

server set 1 in menu 15.2 (see the NAT chapter for details).

 

 

 

Metric

The metric represents the “cost” of transmission for routing

2

 

 

 

purposes. IP routing uses hop count as the cost measurement, with

 

 

 

 

a minimum of 1 for directly connected networks. Type a number that

 

 

 

 

approximates the cost for this link. The number need not be precise,

 

 

 

 

but it must be between 1 and 15. In practice, 2 or 3 is usually a good

 

 

 

 

number.

 

 

 

 

 

 

 

 

Private

This determines if the Prestige will include the route to this remote

No

 

 

 

node in its RIP broadcasts. If set to Yes, this route is kept private

 

 

 

 

and not included in RIP broadcast. If No, the route to this remote

 

 

 

 

node will be propagated to other hosts through RIP broadcasts.

 

 

 

 

 

 

 

 

RIP Direction

Press [SPACE BAR] and then [ENTER] to select the RIP Direction.

None

 

 

 

Options are Both, In Only, Out Only or None.

 

 

 

Version

Press [SPACE BAR] and then [ENTER] to select the RIP version.

RIP-1

 

 

 

Options are RIP-1, RIP-2Bor RIP-2M.

 

 

 

Multicast

IGMP-v1sets IGMP to version 1, IGMP-v2sets IGMP to version 2

None

 

 

 

and None disables IGMP.

 

 

Remote Node Configuration

4-7