ZyXEL Communications 650R-31/33 Table 13-2IP Routing Policy, Figure 13-3IP Routing Policy, Menu 25.1.1 – IP Routing Policy

Prestige 650R-31/33 ADSL Router

Type a number from 1 to 6 to display Menu 25.1.1 – IP Routing Policy (see the next figure). This menu allows you to configure a policy rule.

			Menu 25.1.1 - IP Routing Policy
	Policy Set Name= test
	Active= Yes
	Criteria:		= 6
	IP Protocol			Packet length= 40
	Type of Service= Normal
	Precedence		= 0	Len Comp= N/A
	Source:			end= 1.1.1.1
	addr start= 1.1.1.1
	port start= 20			end= 20
	Destination:			end= 2.2.2.2
	addr start= 2.2.2.2
	port start= 20			end= 20
	Action= Matched		= 192.168.1.1	Log= No
	Gateway addr
	Type of Service= Max Thruput
	Precedence		= 0
			Press ENTER to Confirm or ESC to Cancel:
			Figure 13-3 IP Routing Policy
			Table 13-2 IP Routing Policy
	FIELD			DESCRIPTION
Policy Set Name		This is the policy set name assigned in Menu 25 – IP Routing Policy Setup.
Active		Press [SPACE BAR] and then [ENTER] to select Yes to activate the policy.
Criteria:
	IP Protocol	IP layer 4 protocol, for example, UDP, TCP, ICMP, etc.
	Type of Service	Prioritize incoming network traffic by choosing from Don’t Care, Normal, Min
		Delay, Max Thruput, Min Cost or Max Reliable.
	Precedence	Precedence value of the incoming packet. Press [SPACE BAR] and then
		[ENTER] to select a value from 0 to 7 or Don’t Care.
	Packet Length	Type the length of incoming packets (in bytes). The operators in the Len
		Comp (next field) apply to packets of this length.
	Len Comp	Press [SPACE BAR] and then [ENTER] to choose from Equal, Not Equal,
		Less, Greater, Less or Equal or Greater or Equal.

13-4 IP Policy Routing