Prestige 650R-31/33 ADSL Router

Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule 4, old rule 6 becomes rule 5 and old rule 7 becomes rule 6.

Table 7-5 Fields in Menu 15.1.1

 

FIELD

DESCRIPTION

EXAMPLE

 

 

 

 

 

Set Name

Enter a name for this set of rules. This is a required field. If this field

NAT_SET

 

 

is left blank, the entire set will be deleted.

 

 

Action

The default is Edit. Edit means you want to edit a selected rule (see

Edit

 

 

following field). Insert Before means to insert a rule before the rule

 

 

 

 

selected. The rules after the selected rule will then be moved down

 

 

 

 

by one rule. Delete means to delete the selected rule and then all the

 

 

 

 

rules after the selected one will be advanced one rule. None disables

 

 

 

 

the Select Rule item.

 

 

Select Rule

When you choose Edit, Insert Before or Delete in the previous field

1

 

 

 

the cursor jumps to this field to allow you to select the rule to apply

 

 

 

 

the action in question.

 

 

 

 

 

 

 

 

 

 

 

 

You must press [ENTER] at the bottom of the screen to save the whole set. You must do this again if you make any changes to the set – including deleting a rule. No changes to the set take place until this action is taken.

Selecting Edit in the Action field and then selecting a rule brings up the following menu, Menu 15.1.1.1 - Address Mapping Rule in which you can edit an individual rule and configure the Type, Local and

Global Start/End IPs.An End IP address must be numerically greater than its corresponding IP Startaddress.

NAT

7-11