Prestige 650R-31/33 ADSL Router

Menu 11.3 - Remote Node Network Layer Options

IP Options:

Bridge Options:

IP Address Assignment = Dynamic

Ethernet Addr Timeout(min)= N/A

Rem IP Addr = 0.0.0.0

 

Rem Subnet Mask= 0.0.0.0

 

My WAN Addr= N/A

 

NAT= Full Feature

 

Address Mapping Set= 1

 

Metric= 2

 

Private= No

 

RIP Direction= None

 

Version= RIP-1

 

Multicast= None

 

IP Policies=

 

Enter here to CONFIRM or ESC to CANCEL:

Figure 5-4 Remote Node Network Layer Options

The following table shows the fields in Menu 11.3 – Remote Node Network Layer Options.

Table 5-2 TCP/IP Remote Node Configuration

FIELD

DESCRIPTION

EXAMPLE

 

 

 

IP Address

Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote

Dynamic

Assignment

node is using a dynamically assigned IP address or Static if it is using a

 

 

static (fixed) IP address. You will only be able to configure this in the

 

 

ISP node (the first node); all other nodes are set to Static.

 

Rem IP Addr

This is the IP address of the remote gateway. Type the remote

0.0.0.0

 

Prestige’s WAN IP address here (172.16.02 in the example Figure 5-3

(default)

 

shown previously). If the remote Prestige’s WAN IP address is 0.0.0.0,

 

 

then type 192.168.1.1 (its LAN IP address) here.

 

Rem Subnet

Type the subnet mask assigned to the remote node.

0.0.0.0

Mask

 

(default)

My WAN Addr

Some implementations, especially UNIX derivatives, require separate

 

 

IP network numbers for the WAN and LAN links and each end to have a

 

 

unique address within the WAN network number. In that case, type the

 

 

IP address assigned to the WAN port of your Prestige.

 

 

NOTE: Refers to local Prestige address, not the remote router address.

 

 

 

 

NAT

Press [SPACE BAR] and then [ENTER] to select Full Feature if you

Full

 

have multiple public WAN IP addresses for your Prestige.

Feature

5-4

Remote Node TCP/IP Configuration