Prestige 650R-31/33 ADSL Router

Pressing [ENTER] displays Menu 3.2.1 – IP Alias Setup, as shown next.

Menu 3.2.1 - IP Alias Setup

IP Alias 1= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

IP Alias 2= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

Enter here to CONFIRM or ESC to CANCEL:

Figure 3-5 Menu 3.2.1 – IP Alias Setup

Follow the instructions in the following table to configure IP Alias parameters.

Table 3-1 IP Alias Setup Menu Fields

FIELD

DESCRIPTION

EXAMPLE

 

 

 

IP Alias

Choose Yes to configure the LAN network for the Prestige.

Yes

 

 

 

IP Address

Enter the IP address of your Prestige in dotted decimal notation

192.168.2.1

 

 

 

IP Subnet Mask

Your Prestige will automatically calculate the subnet mask based on

255.255.255.0

 

the IP address that you assign. Unless you are implementing

 

 

subnetting, use the subnet mask computed by the Prestige

 

 

 

 

RIP Direction

Press [SPACE BAR] to select the RIP direction. Choices are None,

None

 

Both, In Only or Out Only.

 

Version

Press [SPACE BAR] to select the RIP version. Choices are RIP-1,

RIP-1

 

RIP-2B or RIP-2M.

 

Incoming

Enter the filter set(s) you wish to apply to the incoming traffic

 

Protocol Filters

between this node and the Prestige.

 

 

 

 

Outgoing

Enter the filter set(s) you wish to apply to the outgoing traffic between

 

Protocol Filters

this node and the Prestige.

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

Internet Access

3-7