ZyXEL Communications 650R-31/33 manual 183

Prestige 650R-31/33 ADSL Router

Table 14-1 Schedule Set Setup Fields

FIELD	DESCRIPTION	EXAMPLE
How Often	Should this schedule set recur weekly or be used just once only?	Once
	Press the [SPACE BAR] and then [ENTER] to select Once or
	Weekly. Both these options are mutually exclusive. If Once is
	selected, then all weekday settings are N/A. When Once is
	selected, the schedule rule deletes automatically after the
	scheduled time elapses.
Once:	If you selected Once in the How Often field above, then enter the	2000-01-01
Date	date the set should activate here in year-month-date format.
Weekday:	If you selected Weekly in the How Often field above, then select	Yes
Day	the day(s) when the set should activate (and recur) by going to	No
	that day(s) and pressing [SPACE BAR] to select Yes, then press
	[ENTER].	N/A
Start Time	Enter the start time when you wish the schedule set to take effect	09:00
	in hour-minute format.
Duration	Enter the maximum length of time this connection is allowed in	08:00
	hour-minute format.
Action	Forced On means that the connection is maintained whether or	Forced On
	not there is a demand call on the line and will persist for the time
	period specified in the Duration field.
	Forced Down means that the connection is blocked whether or
	not there is a demand call on the line.
	Enable Dial-On-Demandmeans that this schedule permits a
	demand call on the line. Disable Dial-On-Demandmeans that
	this schedule prevents a demand call on the line.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11 from the main menu and then enter the target remote node index. Using [SPACE BAR], select PPPoE or PPPoA in the Encapsulation field and then press [ENTER] to make the schedule sets field available as shown next.

Call Scheduling 14-3