Prestige
15.4.1 Remote Management Setup
Remote management setup is for managing Telnet, FTP and Web services. You can customize the service port, access interface and the secured client IP address to enhance security and flexibility.
You may manage your Prestige from a remote location via:
the Internet (WAN only), the LAN only, All (LAN and WAN) or Disable (neither).
WAN only (Internet) | ALL (LAN and WAN) |
LAN only | Disable (Neither) |
If you enable remote management of a service, but have applied a filter to block
the service, then you will not be able to remotely manage the service.
Enter 11, from menu 24, to display Menu 24.11 – Remote Management Control (shown next).
|
| Menu 24.11 - Remote Management Control |
| |
|
|
| ||
| TELNET Server: | Port = 23 | Access = LAN only |
|
|
| Secured Client IP = 0.0.0.0 |
| |
| FTP Server: | Port = 21 | Access = LAN only |
|
|
| Secured Client IP = 0.0.0.0 |
| |
| Web Server: | Port = 80 | Access = LAN only |
|
|
| Secured Client IP = 0.0.0.0 |
| |
| Press ENTER to Confirm or ESC to Cancel: |
| ||
|
|
|
|
|
|
|
|
|
|
Figure 15-2 Menu 24.11 – Remote Management Control
Table 15-1 Menu 24.11 – Remote Management Control
FIELD | DESCRIPTION | EXAMPLE |
|
|
|
Telnet Server | Each of these |
|
FTP Server | to remotely manage the Prestige. |
|
Web Server |
|
|
Port | This field shows the port number for the remote management | 23 |
| service. You may change the port number for a service if needed, |
|
| but you must use the same port number to use that service for |
|
| remote management. |
|
|
|
|
Access | Select the access interface (if any) by pressing the [SPACE BAR]. | LAN only |
| Choices are: LAN only, WAN only, All or Disable. | (Default) |
Remote Management |