ZyXEL Communications 650R-31/33 7.3NAT Setup, Yes, Step, Step, Edit IP, Table 7-3Applying NAT in Menus 4 &, Figure 7-4Menu 11.3 – Applying NAT to the Remote Node

		Prestige 650R-31/33 ADSL Router
Step 1.	Enter 11 from the main menu.
Step 2.	Move the cursor to the Edit IP field, press [SPACE BAR] to select Yes and then press
	[ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options.
	Menu 11.3 - Remote Node Network Layer Options
	IP Options:	Bridge Options:
	IP Address Assignment= Static	Ethernet Addr Timeout (min)= 0
	Rem IP Addr: 0.0.0.0
	Rem Subnet Mask= 0.0.0.0
	My WAN Addr= 0.0.0.0
	NAT= Full Feature
	Address Mapping Set= 2
	Metric= 2
	Private= No
	RIP Direction= Both
	Version= RIP-2B
	Multicast= IGMP-v2
	IP Policies=

Press ENTER to Confirm or ESC to Cancel:

Figure 7-4 Menu 11.3 – Applying NAT to the Remote Node

The following table describes the options for Network Address Translation.

Table 7-3 Applying NAT in Menus 4 & 11.3

FIELD	DESCRIPTION	EXAMPLE
NAT	Press [SPACE BAR] and then [ENTER] to select Full Feature if you	Full Feature
	have multiple public WAN IP addresses for your Prestige. The SMT
	uses the address mapping set that you configure and enter in the
	Address Mapping Set field (menu 15.1 - see section 7.3.1).
	Select None to disable NAT.
	When you select SUA Only, the SMT uses Address Mapping Set 255
	(menu 15.1 - see section 7.3.1). Choose SUA Only if you have just
	one public WAN IP address for your Prestige.

7.3NAT Setup

Use the Address Mapping Sets menus and submenus to create the mapping table used to assign global addresses to computers on the LAN. You can see two NAT Address Mapping sets in menu 15.1. You can

NAT 7-7