|
| Prestige | |
|
| Table | |
|
|
|
|
| FIELD | DESCRIPTION |
|
|
|
|
|
| Use Time Server | Enter the time service protocol that your time server sends when you turn on the |
|
| when Bootup | Prestige. Not all time servers support all protocols, so you may have to check with |
|
|
| your ISP/network administrator or use trial and error to find a protocol that works. |
|
|
| The main differences between them are the format. |
|
|
| Daytime (RFC 867) format is day/month/year/time zone of the server. |
|
|
| Time |
|
|
| seconds since 1970/1/1 at 0:0:0. |
|
|
| NTP |
|
|
| None. The default, enter the time manually. |
|
|
|
|
|
| Time Server | Enter the IP address or domain name of your time server. Check with your |
|
| Address | ISP/network administrator if you are unsure of this information. |
|
|
|
|
|
| Current Time | This field displays an updated time only when you reenter this menu. |
|
| New Time | Enter the new time in hour, minute and second format. |
|
| Current Date | This field displays an updated date only when you |
|
| New Date | Enter the new date in year, month and day format. |
|
| Time Zone | Press [SPACE BAR] and then [ENTER] to set the time difference between your |
|
|
| time zone and Greenwich Mean Time (GMT). |
|
| Daylight Saving | If you use daylight savings time, then choose Yes. |
|
| Start Date | If using daylight savings time, enter the month and day that it starts on. |
|
| End Date | If using daylight savings time, enter the month and day that it ends on |
|
|
|
|
|
| Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to |
| |
| Cancel“ to save your configuration, or press [ESC] to cancel. |
| |
12.3.1 Resetting the Time
The Prestige resets the time in three instances:
i.On leaving menu 24.10 after making changes.
ii.When the Prestige starts up, if there is a time server configured in menu 24.10.
iii.
System Maintenance and Information |