Prestige 650R-31/33 ADSL Router

Step 2. From menu 12, enter 1 to open Menu 12.1 – IP Static Route Setup (shown next).

Menu 12.1 - IP Static Route Setup

1.________

2.________

3.________

4.________

5.________

6.________

7.________

8.________

Enter selection number:

Figure 5-7 Menu 12.1 – IP Static Route Setup

Step 3. Type the route number of a static route you want to configure and then press [ENTER].

Menu 12.1.1 - Edit IP Static Route

Route #: 1

Route Name= ?

Active= No

Destination IP Address= ?

IP Subnet Mask= ?

Gateway IP Address= ?

Metric= 2

Private= No

Press ENTER to Confirm or ESC to Cancel:

Figure 5-8 Edit IP Static Route

The following table describes the fields for Menu 12.1.1 – Edit IP Static Route Setup.

Table 5-3 Edit IP Static Route Menu Fields

FIELD

DESCRIPTION

 

 

Route #

This is the index number of the static route that you chose in menu 12.1.

 

 

Route Name

Type a descriptive name for this route. This is for identification purpose only.

 

 

Active

This field allows you to activate/deactivate this static route.

 

 

Destination IP Address

This parameter specifies the IP network address of the final destination.

 

Routing is always based on network number. If you need to specify a route to

 

a single host, use a subnet mask of 255.255.255.255 in the subnet mask field

 

to force the network number to be identical to the host ID.

 

 

Remote Node TCP/IP Configuration

5-7