10
Filtering
This chapter discusses static IP and MAC address port filtering.
10.1 Introduction to Filtering
Filtering means sifting traffic going through the switch based on the source and/or destination MAC addresses and VLAN group (ID).
10.2 Configuring a Filtering Rule
Click Advanced Application and Filtering to display the screen as shown next.
Figure 47 FilteringThe following table describes the related labels in this screen.
Table 22 FilteringLABEL | DESCRIPTION |
Active | Make sure to select this check box to activate your rule. You may temporarily deactivate a |
| rule without deleting it by deselecting this check box. |
|
|
Name | Type a descriptive name for this filter rule. This is for identification purpose only. |
|
|
| 101 |
|
|