Chapter 34 IEEE 802.1Q Tagged VLAN Commands
Figure 162 port default vid Command Example
sysname(config)# interface
34.5.2 Set Acceptable Frame Type
Syntax:
where
<alltagged> = Specifies all Ethernet frames (tagged and untagged) or only tagged Ethernet frames.
This command sets the specified port to accept all Ethernet frames or only those with an IEEE 802.1Q VLAN tag.
The following example sets ports 1 to 5 to accept only tagged frames.
Figure 163 frame type Command Example
sysname(config)# interface
34.5.3 Enable or Disable Port GVRP
Use the gvrp command to enable GVRP on the port(s). Use the no gvrp command to disable GVRP.
The following example turns off GVRP for ports 1 to 5.
Figure 164 no gvrp Command Example
sysname(config)# interface
34.5.4 Modify Static VLAN
Use the following commands in the
| 261 |
|
|