Chapter 8 VLAN

Table 17

802.1Q Static VLAN (continued)

LABEL

 

DESCRIPTION

Add

 

Click Add to insert the entry in the summary table below and save your changes to the

 

 

switch’s run-time memory. The switch loses these changes if it is turned off or loses

 

 

power, so use the Save link on the top navigation panel to save your changes to the

 

 

non-volatile memory when you are done configuring.

 

 

 

Cancel

 

Click Cancel to reset the fields to your previous configuration.

 

 

 

Clear

 

Click Clear to clear the fields to the factory defaults.

 

 

 

8.3.4 Viewing and Editing VLAN Settings

To view a summary of the VLAN configuration, scroll down to the summary table at the bottom of the Static VLAN screen.

To change the settings of a rule, click a number in the VID field.

Figure 41 Static VLAN: Summary Table

The following table describes the labels in this screen.

Table 18 Static VLAN: Summary Table

LABEL

DESCRIPTION

VID

This field displays the ID number of the VLAN group. Click the number to edit the VLAN

 

settings.

 

 

Active

This field indicates whether the VLAN settings are enabled (Yes) or disabled (No).

 

 

Name

This field displays the descriptive name for this VLAN group.

 

 

Delete

Check the rule(s) that you want to remove in the Delete column, then click the Delete

 

button.

 

 

Cancel

Click Cancel to clear the Delete check boxes.

 

 

92

 

GS-3012/GS-3012F User’s Guide