ZyXEL Communications GS-3012 Series, GS-3012F Series manual 227

Chapter 32 Introducing the Commands

Table 83 Command Summary: Configure Mode (continued)

COMMAND			DESCRIPTION	PRIVILEGE
		ssh	Disables SSH (Secure Shell)	13
			server access to the switch.
		telnet	Disables telnet access to the	13
			switch.
	snmp-server	trap-destination	Removes a configured trap	13
		<ip>	destination IP address.
	spanning-tree		Disables STP.	13
		<port-list>	Disables STP on listed ports.	13
	ssh	key	Disables the secure shell	13
		<rsa1rsadsa>	server encryption key. Your
			switch supports SSH
			versions 1 and 2 using RSA
			and DSA authentication.
		known-hosts	Removes all remote hosts.	13
		known-hosts	Removes the specified	13
		<host-ip>	remote hosts from the list of
			all known hosts.
		known-hosts	Removes remote known	13
		<host-ip>	hosts with the specified
		[1024ssh-	public key (1024-bit RSA1,
		rsassh-dsa]	RSA or DSA).
	storm-control		Disables broadcast storm	13
			control.
	syslog		Disables syslog.	13
		server <ip>	Disables a syslog server	13
			entry.
		server <ip>	Enables a syslog server	13
		inactive	entry.
		type <system,	Sets the device to not	13
		interface,	generate a category of logs.
		switch,
		authentication,
		ip>
	timesync		Disables the time setting on	13
			the timeserver.
	trunk	<T1T2T3T4T5	Disables the specified trunk	13
		T6>	group.
		<T1T2T3T4T5	Removes ports from the	13
		T6> interface	specified trunk group.
		<port-list>
		<T1T2T3T4T5	Disables LACP in the	13
		T6> lacp	specified trunk group.
	vlan	<vlan-id>	Deletes the static VLAN	13
			entry.
	vlan1q	gvrp	Disables GVRP on the	13
			switch.
		port-isolation	Disables port isolation.	13

	227
GS-3012/GS-3012F User’s Guide