Chapter 24 Maintenance
Figure 90 Firmware Upgrade
Type the path and file name of the firmware file you wish to upload to the switch in the File Path text box or click Browse to locate it. After you have specified the file, click Upgrade.
"The system does not restart automatically after you upload the firmware. You need to use the web configurator or the boot config command to restart the system to complete firmware upgrade.
24.6Restore a Configuration File
Restore a previously saved configuration from your computer to the switch using the Restore Configuration screen.
Figure 91 Restore Configuration
Type the path and file name of the configuration file you wish to restore in the File Path text box or click Browse to display a Choose File screen from which you can locate it. After you have specified the file, click Restore. "config" is the name of the configuration file on the switch, so your backup configuration file is automatically renamed when you restore using this screen.
24.7 Backing Up a Configuration File
Backing up your switch configurations allows you to create various “snap shots” of your device from which you may restore at a later date.
Back up your current switch configuration to a computer using the Configuration Backup screen.
170 |
| |
| ||
|
|
|