Chapter 33 Command Examples
33.2.4show logging
"This command is not available in User mode.
Syntax:
show logging
This command displays the system logs. The following figure shows an example.
Figure 130 show logging Command Example
sysname# | show | logging |
| INFO | main: init completed | ||
57 | Thu | Jan | 1 | 00:00:05 1970 PINI | |||
58 | Thu | Jan | 1 | 00:00:02 1970 PP0c | SNMP TRAP 3: link up | ||
59 | Thu | Jan | 1 | 00:00:05 1970 PINI | SNMP TRAP 0: cold start | ||
60 | Thu | Jan | 1 | 00:00:05 1970 PINI | SNMP TRAP 3: link up | ||
61 | Thu | Jan | 1 | 00:00:05 1970 PINI | INFO | main: init completed | |
62 | Thu | Jan | 1 | 00:00:10 1970 | PP24 | INFO | adjtime task pause 1 day |
63 | Thu | Jan | 1 | 00:14:36 1970 | PP0c | SNMP TRAP 2: link down | |
Clear Error Log | (y/n): |
|
|
| |||
"If you clear a log (by entering y at the “Clear Error Log (y/n):” prompt), you cannot view it again.
33.2.5show interface
Syntax:
show interface
This command displays statistics of a port. The following example shows that port 2 is up and the related information.
| 241 |
|
|