Chapter 32 Introducing the Commands

Table 83 Command Summary: Configure Mode (continued)

COMMAND

 

 

DESCRIPTION

PRIVILEGE

classifier

<name>

 

Configures a classifier. A

13

 

<[packet-format

 

classifier groups traffic into

 

 

<802.3untag802.3t

 

data flows according to

 

 

ag

 

specific criteria such as the

 

 

 

source address, destination

 

 

EtherIIuntagEther

 

 

 

 

address, source port number,

 

 

IItag>] [priority

 

destination port number or

 

 

<0-7>]

 

incoming port number.

 

 

[vlan <vlan-id>]

 

 

 

 

[ethernet-type

 

 

 

 

<ether-numipipx

 

 

 

 

arprarp

 

 

 

 

appletalkdecnet

 

 

 

 

snanetbiosdlc>]

 

 

 

 

[source-mac <src-

 

 

 

 

mac-addr>]

 

 

 

 

[source-port

 

 

 

 

<port-num>]

 

 

 

 

[destination-mac

 

 

 

 

<dest-mac-addr>]

 

 

 

 

[dscp <0-63> ]

 

 

 

 

[ip-protocol

 

 

 

 

<protocol-

 

 

 

 

numtcpudpicmpe

 

 

 

 

gpospfrsvpigmp

 

 

 

 

igppimipsec>

 

 

 

 

[establish-only]]

 

 

 

 

[source-ip <src-

 

 

 

 

ip-addr> [mask-

 

 

 

 

bits <mask-bits>]]

 

 

 

 

[source-socket

 

 

 

 

<socket-num>]

 

 

 

 

[destination-ip

 

 

 

 

<dest-ip-addr>

 

 

 

 

[mask-bits <mask-

 

 

 

 

bits>]]

 

 

 

 

[destination-

 

 

 

 

socket <socket-

 

 

 

 

num>]

 

 

 

 

[inactive]>

 

 

 

cluster

<vlan-id>

 

Sets the cluster management

13

 

 

 

VLAN ID.

 

 

member <mac-

 

Sets the cluster member

13

 

address> password

 

switch’s hardware MAC

 

 

<password-str>

 

address and password.

 

 

name <cluster

 

Configures a name to identify

13

 

name>

 

the cluster manager

 

 

rcommand <mac-

 

Logs into a cluster member

13

 

address>

 

switch.

 

default-

<in-bandout-of-

 

Specifies through which

13

management

band>

 

traffic flow the switch is to

 

 

 

 

send packets.

 

dhcp-relay

 

 

Enables DHCP relay.

13

 

221

GS-3012/GS-3012F User’s Guide