|
| Chapter 7 Basic Setting |
| Table 8 System Info (continued) | |
| LABEL | DESCRIPTION |
| MAX | This field displays this fan's maximum speed measured in Revolutions Per Minute |
|
| (RPM). |
|
|
|
| MIN | This field displays this fan's minimum speed measured in Revolutions Per Minute |
|
| (RPM). |
|
|
|
| Threshold | This field displays the minimum speed at which a normal fan should work. |
|
|
|
| Status | Normal indicates that this fan is functioning above the minimum speed. Error |
|
| indicates that this fan is functioning below the minimum speed. |
|
|
|
| Voltage (V) | The power supply for each voltage has a sensor that is capable of detecting and |
|
| reporting if the voltage falls out of the tolerance range. |
|
|
|
| Current | This is the current voltage reading. |
|
|
|
| MAX | This field displays the maximum voltage measured at this point. |
|
|
|
| MIN | This field displays the minimum voltage measured at this point. |
|
|
|
| Threshold | This field displays the minimum voltage at which the switch should work. |
|
|
|
| Status | Normal indicates that the voltage is within an acceptable operating range at this |
|
| point; otherwise Error is displayed. |
|
|
|
7.3 General Setup
Click Basic Setting and General Setup in the navigation panel to display the screen as shown. Use this screen to configure general settings such as the system name and time.
Figure 31 General Setup
| 73 |
|
|