Chapter 33 Command Examples
33.8.9 weight
Syntax:
weight <wt1> <wt2> ... <wt8>
where
<wt1> <wt2> Sets the interface WFQ weighting. A weight value of one to
... <wt8> eight is given to each variable from wt1 to wt8.
An example is shown next.
•Enable port two and ports six to eight for configuration.
•Set the queue weights from Q0 to Q7.
Figure 153 weight Command Example
sysname# configure
sysname(config)# interface
33.8.10 egress set
Syntax:
egress set
where
An example is shown next.
•Enable
•Enable ports one, three, four and five for configuration.
•Set the outgoing traffic ports as the CPU (0) six (6), seven (7) and eight (8).
Figure 154 egress set Command Example
sysname(config)#
33.8.11 qos priority
Syntax:
qos priority <0 .. 7>
where |
|
<0 .. 7> | Sets the quality of service priority for an interface(s). |
| 253 |
|
|