Chapter 28 Cluster Management

Figure 112 Cluster Member Web Configuration Screen

28.2.1.1 Uploading Firmware to a Cluster Member Switch

You can use FTP to upload firmware to a cluster member switch through the cluster manager switch as shown in the following example.

Figure 113 Example: Uploading Firmware to a Cluster Member Switch

C:\> ftp <Cluster Manager IP address> Connected to 192.168.0.1.

220 GS-3012F FTP version 1.0 ready at Thu Jan 1 00:31:12 1970 User (192.168.0.1:(none)): admin

331 Enter PASS command Password:

230 Logged in ftp> ls

200 Port command okay

150 Opening data connection for LIST

--w--w--w-

1

owner

group

3075006

Jul 01

12:00 ras

-rw-rw-rw-

1

owner

group

393216

Jul 01

12:00 config

--w--w--w-

1 owner

group

0 Jul 01 12:00 fw-00-13-49-00-00-

02

1

owner

group

0

Jul 01

12:00 config-00-13-49-

-rw-rw-rw-

00-00-02

 

 

 

 

 

 

226 File sent OK

ftp: 296 bytes received in 0.01Seconds 19.73Kbytes/sec. ftp> put 370LR0.bin fw-00-13-49-00-00-02

ftp> bye

The following table explains some of the FTP parameters.

Table 75 FTP Upload to Cluster member Example

FTP PARAMETER

DESCRIPTION

User name

Enter “admin”.

 

 

Password

The web configurator password default is 1234.

 

 

ls

Enter this command to list the name of cluster member switch’s firmware and

 

configuration file.

 

 

fw-00-13-49-00-00-02

The cluster member switch’s firmware name as seen in the cluster manager

 

switch.

 

 

 

195

GS-3012/GS-3012F User’s Guide