Chapter 24 Maintenance
24.8.3 GUI-based FTP Clients
The following table describes some of the commands that you may see in
Table 61 General Commands for
COMMAND | DESCRIPTION |
Host Address | Enter the address of the host server. |
|
|
Login Type | Anonymous. |
| This is when a user I.D. and password is automatically supplied to the |
| server for anonymous access. Anonymous logins will work only if your |
| ISP or service administrator has enabled this option. |
| Normal. |
| The server requires a unique User ID and Password to login. |
|
|
Transfer Type | Transfer files in either ASCII (plain text format) or in binary mode. |
| Configuration and firmware files should be transferred in binary mode. |
|
|
Initial Remote Directory | Specify the default remote directory (path). |
|
|
Initial Local Directory | Specify the default local directory (path). |
|
|
24.8.4 FTP Restrictions
FTP will not work when:
•FTP service is disabled in the Access Control screen.
•The IP address(es) in the Secured Client Set in the Remote Management screen does not match the client IP address. If it does not match, the switch will disconnect the Telnet session immediately
| 173 |
|
|