Chapter 33 Command Examples

33.7.3 no port-access-authenticator

Syntax:

no port-access-authenticator

no port-access-authenticator <port-list> reauthenticate no port-access-authenticator <port-list>

where

 

Disables port authentication on the switch.

<port-list>

Disables the re-authentication mechanism on the listed ports.

reauthenticate

 

<port-list>

Disables authentication on the listed ports.

An example is shown next.

•Disable authentication on the switch.

•Disable re-authentication on ports one, three, four and five.

•Disable authentication on ports one, six and seven.

Figure 143 no port-access-authenticator Command Example

sysname(config)# no port-access-authenticator

sysname(config)# no port-access-authenticator 1,3-5 reauthenticate sysname(config)# no port-access-authenticator 1,6-7

33.7.4 no ssh

Syntax:

no ssh key <rsa1rsadsa>

no ssh known-hosts <host-ip> <cr>

no ssh known-hosts <host-ip> [1024ssh-rsassh-dsa]

where

key <rsa1rsadsa>

known-hosts <host-ip>

known-hosts <host-ip> [1024ssh- rsassh-dsa]

Disables the secure shell server encryption key. Your switch supports SSH versions 1 and 2 using RSA and DSA authentication.

Remove specific remote hosts from the list of all known hosts.

Remove remote known hosts with a specified public key (1024-bit RSA1, RSA or DSA).

An example is shown next.

•Disable the secure shell RSA1 encryption key.

•Remove the remote host with IP address 172.165.1.8 from the list of known hosts.

248

 

GS-3012/GS-3012F User’s Guide