Chapter 22 DHCP Relay

Figure 83 DHCP Relay

The following table describes the labels in this screen.

Table 56 DHCP Relay

LABEL

DESCRIPTION

Active

Select this check box to enable DHCP relay.

 

 

Remote

Enter the IP address of a DHCP server in dotted decimal notation.

DHCP

 

Server 1 .. 3

 

 

 

Relay Agent

Select the Option 82 check box to have the switch add information (slot number, port

Information

number and VLAN ID) to client TCP/IP configuration requests that it relays to a DHCP

 

server.

 

 

Information

This read-only field displays the system name you configure in the General Setup

 

screen.

 

Select the check box to add the switch name to the DHCP client requests that the switch

 

relays to a DHCP server.

 

 

Apply

Click Apply to save your changes to the switch’s run-time memory. The switch loses

 

these changes if it is turned off or loses power, so use the Save link on the top

 

navigation panel to save your changes to the non-volatile memory when you are done

 

configuring.

 

 

Cancel

Click Cancel to reset the fields back to your previous configuration.

 

 

162

 

GS-3012/GS-3012F User’s Guide