Chapter 33 Command Examples
Figure 131 show interface Command Example
sysname# show interface 2 | :2 | |
Port Info | Port NO. | |
| Link | :100M/F |
| Statuss | :FORWARDING |
| LACP | :Disabled |
| TxPkts | :69 |
| RxPkts | :4 |
| Errors | :0 |
| Tx KBs/s | :1.684 |
| Rx KBs/s | :1.684 |
TX Packet | Up Time | :0:02:12 |
Tx Packets | :69 | |
| Multicast | :0 |
| Broadcast | :0 |
| Pause | :0 |
RX Packet | Tagged | :0 |
Rx Packets | :4 | |
| Multicast | :0 |
| Broadcast | :4 |
| Pause | :0 |
TX Collison | Control | :0 |
Single | :0 | |
| Multiple | :0 |
| Excessive | :0 |
Error Packet | Late | :0 |
RX CRC | :0 | |
| Length | :0 |
Distribution | Runt | :0 |
64 | :4 | |
| 65 to 127 | :74 |
| 128 to 255 | :18 |
| 256 to 511 | :0 |
| 512 to 1023 | :0 |
| 1024 to 1518 | :44 |
sysname# | Giant | :0 |
|
| |
33.2.6 show mac address-table
Syntax:
show mac
where
<sort> | = Specifies the sorting criteria (MAC, VID or port). |
This command displays the MAC address(es) stored in the switch. The following example shows a static MAC address table.
242 |
| |
| ||
|
|
|