ZyXEL Communications GS-3012 Series, GS-3012F Series 33.8.3 broadcast-limit, 33.8.4 bandwidth-limit

Chapter 33 Command Examples

•Enable ports one, three, four and five for configuration.

•Set the BPDU control to tunnel, to forward BPDUs received on ports one, three, four and five.

Figure 146 interface bpdu-control Command Example

sysname(config)# interface port-channel 1,3-5 sysname(config-interface)# bpdu-control tunnel sysname(config-interface)#

33.8.3 broadcast-limit

Syntax:

broadcast-limit broadcast-limit <pkt/s>

where
	Enables broadcast storm control limit on the switch.
<pkt/s>	Sets how many broadcast packets the interface receives per
	second.

An example is shown next.

•Enable port one for configuration.

•Enable broadcast control.

•Set the number of broadband packets the interface receives per second

Figure 147 broadcast-limit Command Example

sysname(config)# interface port-channel 1 sysname(config-interface)# broadcast-limit sysname(config-interface)# broadcast-limit 21

33.8.4 bandwidth-limit

Syntax:

bandwidth-limit bandwidth-limit pir <Kbps> bandwidth-limit cir <Kbps> bandwidth-limit egress <Kbps>

where
	Enables bandwidth control on the switch.
<Kbps>	Sets the maximum bandwidth allowed for outgoing traffic
	(egress) or incoming traffic (ingress) on the switch.
An example is shown next.

250
	GS-3012/GS-3012F User’s Guide