Chapter 7 Network Setting

This screen contains the following fields:

Table 33 WPS

LABEL

DESCRIPTION

Enable WPS

Select Enable and click Apply to activate WPS on the WiMAX Device. Select

 

Disable and click Apply to deactivate WPS.

 

 

Start WPS PBC

This field is available after you select Enable in the Enable WPS field and click

 

Apply.

 

Click this to activate the Push Button Configuration. After clicking this you will be

 

able to use the WPS button at the back of the device to add new wireless clients.

 

Note: You must press the WPS buttons within two minutes of each other.

 

 

7.10 MAC Address Filter

This screen is available for models with WiFi wireless feature. Use this screen to restrict access to the WiFi network by device ID (MAC address).

Click on Network Setting > WLAN > MAC Address Filter. The screen appears as shown.

Figure 51 MAC Address Filter Screen

This screen contains the following fields:

Table 34 MAC Address Filter

LABEL

DESCRIPTION

Enable MAC

Select the check box to enable MAC address filtering. Then, the following fields

Address Filter

display.

 

 

Mode

Define the filter action for the list of MAC addresses in the MAC address table.

 

Select Allow listed stations to permit access to the WiMAX Device only to

 

addresses listed. MAC addresses not listed will be denied access to the WiMAX

 

Device.

 

Select Deny listed stations to block access to the WiMAX Device to the

 

computers or devices listed in this list.

 

 

#

This is the index number of the MAC address.

 

 

Active

Select this box to make the policy effective or ineffective for a particular device.

 

 

Name

Type the name of the device. The name can be up to 20 characters long, and any

 

combination of letters, numbers or symbols.

 

 

 

103

WiMAX Device Configuration User’s Guide