Chapter 7 Network Setting
7.14.1 Port Forwarding Wizard
Use this wizard to set up a port forwarding rule for incoming service requests to the ports on your local network.
Click Network Setting > NAT > Port Forwarding > Wizard to open this screen as shown next.
Figure 56 Port Forwarding Wizard Screen
This screen contains the following fields:
Table 39 Port Forwarding Wizard
LABEL | DESCRIPTION |
Active | Select this to make this port forwarding rule active. |
|
|
Port Forward Rule | Select the type of port forwarding rule. |
|
|
Rule Name | Enter a name for the port forwarding rule. |
|
|
Protocol | Select the port forwarding protocol. |
|
|
Incoming Start | Enter the starting port number for incoming traffic for the port forwarding rule. |
Port |
|
|
|
Incoming End | Enter the ending port number for incoming traffic for the port forwarding rule. |
Port |
|
|
|
Forwarding Start | Enter the starting port number for forwarded traffic for the port forwarding rule. |
Port |
|
|
|
Forwarding End | Enter the ending port number for forwarded traffic for the port forwarding rule. |
Port |
|
|
|
Server IP | Enter the port forwarding server IP address. |
|
|
7.15 Port Trigger
Use these settings to automate port forwarding and allow computers on local network to provide services that would normally require a fixed address on the local network.
108 |
|
WiMAX Device Configuration User’s Guide | |
|
|