Chapter 8 Security

Table 53 PPTP Server (continued)

LABEL

DESCRIPTION

Auth Protocol

Select the Authentication Protocol allowed for the connection. Options are:

 

PAP - Password Authentication Protocol (PAP) authentication occurs in clear

 

text and does not use encryption. It’s probably not a good idea to rely on this

 

for security.

 

CHAP - Challenge Handshake Authentication Protocol (CHAP) provides

 

authentication through a shared secret key and uses a three way handshake.

 

MSCHAPv1 - Microsoft CHAP v1 (MSCHAPv1) provides authentication

 

through a shared secret key and uses a three way handshake. It provides

 

improved usability with Microsoft products.

 

MSCHAPv2 - Microsoft CHAP v2 (MSCHAPv2) provides encryption through a

 

shared secret key and uses a three way handshake. It provides additional

 

security over MSCHAPv1, including two-way authentication.

 

 

MPPE

If MSCHAPv1 or MSCHAPv2 is selected as an Auth Protocol, use the drop-

Encryption

down list box to select the type of Microsoft Point-to-Point Encryption (MPPE).

 

Options are:

 

MPPE 40 bits - MPPE with 40 bit session key length

 

MPPE 128 bits - MPPE with 128 bit session key length

 

• Auto - Automatically select either MPPE 40 bits or MPPE 128 bits

 

 

Local IP

Enter the local endpoint for the PPTP connection.

Address

 

 

 

Remote Start

Enter the local IP address range the WiMAX Device assigns to remote users if the

IP

remote client device is set to obtain an IP address automatically.

 

 

Idle Timeout

Enter the time in minutes to timeout PPTP connections.

 

 

DNS Server 1

Specify the IP addresses of DNS servers to assign to the remote users.

DNS Server 2

 

 

 

User Access List

 

 

 

User Name

Enter the user name for the remote user.

 

 

Server

Select the server that the remote user has access to: PPTPD, L2TPD or Both.

 

 

Password

Enter the password for the remote user.

 

 

IP Address

Enter the local IP address the WiMAX Device assigns to the remote user.

 

Entering 0.0.0.0 indicates the local IP address will be dynamically assigned.

 

 

Delete

Select an entry and click this to delete it.

 

 

Add

Click this to create a new entry.

 

 

OK

Click this to save the changes.

 

 

Connection List

 

 

 

User Name

This displays the user name for the remote user.

 

 

Remote IP

This displays the remote endpoint IP address of the remote user.

Address

 

 

 

PPTP IP

This displays the local IP address of the PPTP server.

Address

 

 

 

Login Time

This displays the time the PPTP connection started.

 

 

Link Time(s)

This displays the duration of the PPTP connection.

 

 

8.6 PPTP VPN Client

Use this screen to view settings for Point to Point Tunneling Protocol (PPTP) clients.

130

 

WiMAX Device Configuration User’s Guide