Chapter 7 Network Setting
Click Add in the Network Setting > Route > Static Route screen to open this screen as shown next.
Figure 53 Static Route Screen
This screen contains the following fields:
Table 36 Static Route
LABEL | DESCRIPTION |
Destination IP | Enter the destination IP address of the static route. |
|
|
Subnet Mask | Enter the subnet mask of the static route. |
|
|
Next Hop | Select Interface and then select WAN or LAN for the next hop of the static |
| route. |
| If the next hop is an IP address rather than an interface on the WiMAX Device, |
| select IP Address and enter the IP address. |
|
|
Metric | Enter the static route metric. |
|
|
7.13 RIP
Use these settings to configure how the WiMAX Device exchanges information with other routers.
| 105 |
WiMAX Device Configuration User’s Guide | |
|
|