Chapter 12 Maintenance

Click Maintenance > Remote MGMT > CWMP to open this screen as shown next.

Figure 110 CWMP Screen

This screen contains the following fields:

Table 86 CWMP

LABEL

DESCRIPTION

Enable

Select this to enable remote management using this service.

 

 

ACS Server URL

Enter the URL or IP address of the auto-configuration server.

 

 

Bootstrap Enable

Select this to enable bootstrap events.

 

 

ACS Username

Enter the user name sent when the WiMAX Device connects to the ACS and

 

which is used for authentication.

 

You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores

 

but spaces are not allowed.

 

 

ACS Password

Enter the password sent when the WiMAX Device connects to an ACS and which

 

is used for authentication.

 

You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores

 

but spaces are not allowed.

 

 

Periodical Inform

Select this to allow the WiMAX Device to periodically connect to the ACS and

Enable

check for configuration updates.

 

If you do not enable this feature then the WiMAX Device can only be updated

 

automatically when the ACS initiates contact with it and if you selected the

 

checkbox on this screen.

 

 

Periodical Inform

Enter the time interval (in seconds) at which the WiMAX Device connects to the

Interval

auto-configuration server.

 

 

Connection

Enter the connection request user name that the ACS must send to the WiMAX

Request

Device when it requests a connection.

Username

You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores

 

 

but spaces are not allowed.

 

Note: This must be provided by the ACS administrator.

 

 

184

 

WiMAX Device Configuration User’s Guide