Chapter 11 The VoIP Line Screens

11.2 Phone

Click VoIP > Line 1 (or Line 2) > Phone to configure phone related settings.

Figure 98 Phone

The following table describes the labels in this screen.

Table 77 Phone

LABEL

DESCRIPTION

Phone

 

 

 

Hook Flash Detect

Enter the number of milliseconds for the upper bound of a quick on-hook and off-

Upper Bound

hook cycle in order to recognize a hook flash event.

 

 

Hook Flash Detect

Enter the number of milliseconds for the lower bound of a quick on-hook and off-

Lower Bound

hook cycle in order to recognize a hook flash event.

 

 

Voice Tx Level

Select the volume level transmitted by the WiMAX Device. -9 is the quietest, and

 

9 is the loudest.

 

 

Voice Rx Level

Select the volume level transmitted to the WiMAX Device. -9 is the quietest, and

 

9 is the loudest.

 

 

11.3 Voice

Click VoIP > Line 1 (or Line 2) > Voice to configure voice settings.

Figure 99 Voice

The following table describes the labels in this screen.

Table 78 Voice

LABELDESCRIPTION

VAD - Voice Activity Detection

Enable VAD

Enable Voice Active Detector (VAD) to have the WiMAX Device stop transmitting

 

voice traffic when you are not speaking using the detection method. This reduces

 

the bandwidth the WiMAX Device uses.

 

 

172

 

WiMAX Device Configuration User’s Guide